Hot Swap card

	JET-5035
	★Straight PCI32 Hot Swap card ★JET-5035 PCI32 Hot Swap Extender is 32 bits PCI Bus slot extension protector device. After installation it on motherboard, user can exchange the card without power on the system power. (He just only uses the hardware switch or software control to isolate all PCI bus signals) Since user can directly unplug the PCI interface card under system power on, it will save the testing time for system restart. (Include power on BIOS testing, boot Operating System (such as loading Microsoft Windows 31/95/98/2000/NT) and loading testing program. Apply the PCI Hot Swap Extender in manufacture testing and debugging, it will approve the effectively about 2~5 times. JET-5035 card support the current over load protection, When the current is over load (such as power signal short), it will isolate (switch off) all PCI signals (include power signals) upon to tested card to reduce the motherboard and PCI interface card defection.

	JET-1101 Testing Solution A
	★Straight PCI-E to Mini PCI Express Hot Swap Adaptor ★JET-1101 PCIE- MINI PCIE Card Hot Swap Adaptor provides the transformation of PCI-E x 1 interface into Mini PCI-E card interface. It also can manage the control signal and power isolation. With JET-5303A or JET-5303B PCI Express X1 extender cable, the test main board could be separated from the card testing chamber and the noise signal could be fully screened out. The operator also could switch the testing card without turning the main board computer off. This could save the time for turning computer off to reboot and reload the operation system. Once this is applied to manufacturing or repairing stations, the efficiency could be improved much. JET-5322 MINI PCIE Card & JET-5321 MINI PCIE Card-Express Card could be used on PC to test Mini-PCI-E / Express card interface easily. The testing system could be used for both interface without change any hardware configuration to reduce testing cost and overall efficiency.

	JET-1101 Testing Solution B
	★Straight PCI-E to Mini PCI Express Hot Swap Adaptor ★JET-1101 PCIE- MINI PCIE Card Hot Swap Adaptor provides the transformation of PCI-E x 1 interface into Mini PCI-E card interface. It also can manage the control signal and power isolation. The operator also could switch the testing card without turning the main board computer off. This could save the time for turning computer off to reboot and reload the operation system. Once this is applied to manufacturing or repairing stations, the efficiency could be improved much. With JET-5324 MINI PCIE Cable, the UUT could be separately extended into auto testing machine and then raise production. JET-5322 MINI PCIE Card & JET-5321 MINI PCIE Card-Express Card could be used on PC to test Mini-PCI-E / Express card interface easily. The testing system could be used for both interface without change any hardware configuration to reduce testing cost and overall efficiency.

	JET-7402 Testing Solution C
	★Straight USB to Express card Adaptor ★JET-7402 USB- Express Card Adaptor provides the transformation of USB (Type A) interface into Mini PCIE Card interface. It is connected with the test main board by JET-7403 USB Cable (Type A). By the USB port of main board to support the hot swap function. The operator also could switch the testing card without turning the main board computer off. This could save the time for turning computer off to reboot and reload the operation system. Once this is applied to manufacturing or repairing stations, the efficiency could be improved much. Note: As using JET-7402 USB-Express Card Adaptor to test Mini PCIE Card or Express Card, the designed control signal of UUT (Unit Under Test) must base on USB signal. JET-5322 MINI PCIE Card & JET-5321 MINI PCIE Card-Express Card could be used on PC to test Mini-PCI-E / Express card interface easily. The testing system could be used for both interface without change any hardware configuration to reduce testing cost and overall efficiency.